Important: the screen size specified in the car manual does not match the size of the protective glass. This is a common reason for mistakes when ordering protective glass for the car screen.
1. Screen size in the manual ≠ size of the protective glass
In the manual, the manufacturer specifies the matrix size — the working part of the display. However, this value cannot be used when choosing protective glass for the multimedia screen:
- in most cases, the matrix is smaller than the visible part of the screen;
- protective glass for multimedia is manufactured to cover the full size of the screen, not just the matrix;
- one glass may cover two areas at once (instrument cluster + multimedia), which in the manual have different sizes.
Therefore, you should rely only on the dimensions shown in the drawing (photo #3) on the product page.
2. How to take measurements correctly
Typical mistakes when measuring the multimedia system screen:
- measuring the screen together with the frame;
- placing the ruler at an angle to the surface;
- starting the measurement not from the edge of the visible area;
- measuring the wrong side indicated in the drawing.
To avoid mistakes and measure the car screen correctly:
- measure strictly the visible part of the display, the frame is not included;
- the ruler must be placed straight, without tilting;
- follow the side indicated in the drawing;
- subtract 1 mm from the measurement — this is the gap needed for easy positioning and removal.
3. If the screen has a complex shape
Some car screens have curved or non-standard shapes with no parallel sides. In such cases, the size is not specified in the drawing. Then you should rely on visual similarity with the photo.
4. When one, two, or three dimensions are specified
- If one dimension is specified — just measure it and compare with the drawing. If it matches → the glass fits with 99% certainty.
- If two or three dimensions are specified — all must match.
5. Consider transition production years
Sometimes, in the same production year, a model is released with different screens (for example, after a facelift). In the catalog, such versions are placed in two sections, e.g. “up to 2024” and “from 2024”.
6. Step-by-step algorithm for selecting protective glass
- Select the make, model, and production year of the car.
- Identify your type of multimedia screen on the main photo.
- Check the interior (photo #2).
- Open the drawing with dimensions (photo #3).
- Take a ruler and measure the multimedia screen as shown in the drawing.
- Compare the result with the data on the website.
- If everything matches — you can order the protective glass for the screen.
- If in doubt — call our specialist.
7. Example: BYD Song L (2023)
The catalog contains two versions of the central monitor:
- 1st version: width 355 mm, height 212 mm;
- 2nd version: width 355 mm, height 215 mm.
The difference is only 3 mm in height, but it determines the choice. When measuring, consider only the visible part of the screen and subtract 1 mm for the gap.
Conclusion
To choose the right Pixsel protective glass for your car screen:
- rely on the drawing and photos;
- measure the multimedia screen without the frame;
- consider transition production years and equipment options.
This way, you will be sure to choose the correct protective glass for the multimedia display and protect the screen from scratches and damage.